×

Newsletter

The world’s only super fuel and oil conditioners. Stabilising the fuels and oils allowing for improved atomisation, complete in cylinder combustion and reduced emissions.

FAQ

FAQ & Information

In a few applications we will recommend a double dose as the initial dose and standard dosage thereafter. We do not recommend over dosage. It will not cause any damage except cause a hole in your wallet. Under dosage will reduce expected performance outcomes.

The standard dosage is 1:500.

NO. ENERGEN readily mixes with all liquid hydrocarbons. 

The only time mechanical mixing is used is when you use ENERGEN to dissolve fuel sludge’s back into usable fuel. This will also involve heating to approx. 70°C.

Generally speaking, due to faster and more complete combustion with the heat generated used as power and less after burning in the exhaust, exhaust temperatures will decrease slightly. In the tests and trials we have done the drop is in the vicinity of 10-15°C when using ENERGEN.

Generally speaking engine manufacturers have played down independent after-market products not sold with their name or part number.

ENERGEN is no exception to this rule.

ENERGEN will not harm engines or their components. In fact ENERGEN has been proven to do just the opposite by improving combustion to the point where abrasive hard carbon build-up is virtually eliminated. As a result, engine wear related to hard carbon build-up (rings, injectors, valves and liners etc…) is reduced. Further oil contaminants are reduced, cutting down on the wear to lower engine components.

Also with diesel engines starter motors respond quicker reducing replacement frequencies.

We use third party independent transport companies. If you have your own preferred company to ship with your own account you are welcome to use them..

All orders must be paid for prior to dispatch.

We have 3 direct sales locations, one in the United States (US East Coast Time Zone) and two locations in Australia (Australian East Cost Time Zone).

Our hours are Mon-Fri 08:00-17:00.

On Saturdays 10:00-16:00.

Sundays we are closed.

We currently manufacture in NJ USA and VIC Australia..

From our Manufacturing Facilities NO. 

As we are not partnering with Performance Lubricants Group it can be directly picked up from there numerous sales agents.

Go to top